Services catalogue

List of services

• BIOCAR-001

  Liquid sample analysis

  Analysis of liquid samples from biomass processing

• BIOCAR-002

  Basic analysis of biomass composition

  Analysis of the major lignocellulosic biomass components

• BIOCAR-003

  Complete analysis of biomass composition

  Analysis of all lignocellulosic biomass components

• BIOCAR-004

  Determination of starch content in lignocellulosic biomass

• BIOCAR-005

  Pretreatment test

  Steam explosion pretreatment test

• BIOCAR-006

  Determination of the Biomethane or Biogas Potential (BMP)

  Rate per sample

• BIOM-001

  Determination of humidity in biomass, waste and their ashes

• BIOM-002A

  Determination of top and lower calorific power of biomass, waste and their ashes.

  For a number of samples less than 10

• BIOM-002B

  Determination of top and lower calorific power of biomass, waste and their ashes.

  For a number of samples equal to 10 or more

• BIOM-003A

  Determination of carbon, hydrogen and nitrogen of biomass, waste and their ashes.

  For a number of samples less than 10

• BIOM-003B

  Determination of carbon, hydrogen and nitrogen of biomass, waste and their ashes.

  For a number of samples equal to 10 or more

• BIOM-004A

  Determination of volatile matter content of biomass, waste and their ashes.

  For a number of samples less than 10

• BIOM-004B

  Determination of volatile matter content of biomass, waste and their ashes.

  For a number of samples equal to 10 or more

• BIOM-005A

  Determination of chlorine and sulphur in biomass and waste.

  For a number of samples less than 10

• BIOM-005B

  Determination of chlorine and sulphur in biomass and waste.

  For a number of samples equal to 10 or more

• BIOM-006A

  Determination of chlorine in biomass, waste and their ashes.

  For a number of samples less than 10

• BIOM-006B

  Determination of chlorine in biomass, waste and their ashes.

  For a number of samples equal to 10 or more

• BIOM-007A

  Determination of inorganic elements (Al, Ca, Fe, K, Mg, Na, P, S, Si, Ba, Mn, Sr, Ti, Zn) in ashes.

  For a number of samples less than 10

• BIOM-007B

  Determination of inorganic elements (Al, Ca, Fe, K, Mg, Na, P, S, Si, Ba, Mn, Sr, Ti, Zn) in ashes.

  For a number of samples equal to 10 or more

• BIOM-008A

  Determination of inorganic elements (Al, Ca, Fe, K, Mg, Na, P, S, Si, Ba, Mn, Sr, Ti, Zn) in biomass and waste.

  For a number of samples less than 10

• BIOM-008B

  Determination of inorganic elements (Al, Ca, Fe, K, Mg, Na, P, S, Si, Ba, Mn, Sr, Ti, Zn) in biomass and waste.

  For a number of samples equal to 10 or more

• BIOM-009A

  Determination of the behaviour to the fusion of ashes from biomass and waste.

  For a number of samples less than 10

• BIOM-009B

  Determination of the behaviour to the fusion of ashes from biomass and waste.

  For a number of samples equal to 10 or more

• BIOM-010A

  Determination of bulk density of biomass, weast and their ashes.

  For a number of samples less than 10

• BIOM-010B

  Determination of bulk density of biomass, weast and their ashes.

  For a number of samples equal to 10 or more

• BIOM-011A

  Determination of particle size distribution of biomass, waste and their ashes

  For a number of samples less than 10

• BIOM-011B

  Determination of particle size distribution of biomass, waste and their ashes

  For a number of samples equal to 10 or more

• BIOM-012

  Determination of the mechanical durability in briquettes of biomass and waste.

  For a number of samples less than 10

• BIOM-013A

  Determination of the mechanical durability in briquettes of biomass and waste.

  For a number of samples less than 10

• BIOM-013B

  Determination of the mechanical durability in briquettes of biomass and waste.

  For a number of samples equal to 10 or more

• BIOM-014A

  Determination of particle density in pellets of biomass and waste

  For a number of samples less than 10

• BIOM-014B

  Determination of particle density in pellets of biomass and waste

  For a number of samples equal to 10 or more

• BIOM-015A

  Determination of particle density in biomass pellets, waste and other irregular shaped materials, no compressible

  For a number of samples less than 10

• BIOM-015B

  Determination of particle density in biomass pellets, waste and other irregular shaped materials, no compressible

  For a number of samples of 10 or more

• BIOM-016A

  Determination of length and diameter in pellets and briquettes of biomass and waste.

  For a number of samples less than 10

• BIOM-016B

  Determination of length and diameter in pellets and briquettes of biomass and waste.

  For a number of samples equal to 10 or more

• BIOM-018

  Preparation of samples received in the laboratory to be analysed through milling and homogenization

• BIOM-019A

  Differential thermal and thermogravimetric analysis

  For a number of samples less than 10

• BIOM-019B

  Differential thermal and thermogravimetric analysis

  For a number of samples equal to 10 or more

• BIOM-026

  Determination of ash content in biomass, waste and their ashes

• BIOM-027

  Determination of crystalline mineral phases in biomass ashes and waste by X-ray diffraction.

• BIOM-028A

  Determination of size distribution of disintegrated pellets in biomass and waste.

  For a number of samples less than 10

• BIOM-028B

  Determination of size distribution of disintegrated pellets in biomass and waste.

  For a number of samples equal to 10 or more

• BIOM-030

  Determination of the proportion of oversized pellets in biomass pellets and waste

• BIOM-031

  Determination of biomass content (selective dissolution) in recovered solid fuels.

• BIOM-032A

  Determination of oil content in olive stones and fruit peels.

  For a number of samples less than 10

• BIOM-032B

  Determination of oil content in olive stones and fruit peels.

  For a number of samples equal to 10 or more

• BIOM-033A

  Determination of skin content in olive stones.

  For a number of samples less than 10

• BIOM-033B

  Determination of skin content in olive stones.

  For a number of samples equal to 10 or more

• BIOM-034A

  Determination of trace elements (As, Cd, Cr, Cu, Hg, Ni, Pb y Zn) in biomass and waste.

  For a number of samples less than 10

• BIOM-034B

  Determination of trace elements (As, Cd, Cr, Cu, Hg, Ni, Pb y Zn) in biomass and waste.

  For a number of samples equal to 10 or more

• BIOM-035

  Determination of fines in biomass pellets and waste.

• CETA-CLOUD-001

  Provision of cloud resources for R&D projects and proof-of-concept testing

• COMPUT-001

  Servicio de computación científica

• CONVERS-001

  Test of combustion in 500-kW mobile grill boiler for solid biofuels or waste fuels

  It includes continuous analysis of flue gas during the test using several analysers: NDIR, paramagnetic, ultraviolet and flame ionization

• CONVERS-002

  Test of combustion in a 1000-kW bubbling fluidised bed furnace for solid biofuels or waste fuels

  It includes continuous analysis of flue gas during the test using several analysers: NDIR, paramagnetic, ultraviolet and flame ionization

• CONVERS-004

  Analysis of gases and particles in biomass combustion and solid waste

  Analysis of gas in continuous by FTIR and quantification of total solid particles in the flue gas by discontinuous sampling through isokinetc equipment.

• CONVERS-005

  Combustion test in a hot water boiler, household type grill, with side feed of 40-Kw thermal input (PM40) for woody or herbaceous solid biofuels in bulk or pelletised.

  It includes continuous analysis of flue gas during the test using several analysers: NDIR, paramagnetic, ultraviolet and flame ionization

• CONVERS-006

  Gasification test in GLFB100.

  It includes continuous analysis of flue gas during the test using several analysers: NDIR, paramagnetic, ultraviolet and flame ionization

• CONVERS-007

  Sampling of tars in gasification gas and quantification of gravimetric tars.

  It includes the sampling of tars and the quantification of gravimetric tars. It doesn't include the complete determination, for which it would be necessary to add the analysis of the collected samples.